BRYDGE PRODUCT INSTRUCTIONS
& USER GUIDES
User Guide: Brydge G-Type - for Google Pixel Slate
1 - Place your Brydge on a flat surface, rotate the hinges upright to 90º and insert your Pixel Slate into the hinges.
2 - To remove, hold your Pixel Slate and pull straight up, with one hand firmly holding your Brydge against a hard surface.
To manually power ON, press and hold the power key
the light will blink green to indicate the keyboard is on).
To manually power OFF, press and hold the power key for 3 seconds (the light will blink red to indicate the keyboard is off).
NOTE: To conserve battery, your Brydge will enter sleep mode after 15 minutes of non-use. Your Brydge will also enter sleep mode when both devices are closed like a laptop. Press any key to turn back on.
1 - Once the keyboard is on, press and hold the BluetoothTM key for 3 seconds. The power key will flash blue indicating your Brydge is ready to pair.
2 - On your Pixel Slate, under the Bluetooth settings select Brydge G-Type. The power key will stop blinking blue when the pairing is complete.
To charge your Brydge insert the supplied USB-C cable into the charging port on your Brydge. The battery is charging when the light on the power key is red; the light will turn off when the battery is fully charged.
Turn on and pair
Attach and remove
Check battery and charge